Hello, how can we help you?

Recent Searches: Workspace - 3.2 - Workflow - 3.2 - Training - 3.2 - Request - 3.2

SPC - 3.2

 

Normality test: more reliable, validated statistical analyses

SoftExpert SPC advances in its statistical evolution: in this version, it now runs normality tests automatically, with more technical rigor and confidence in decisions based on collected data.

Analyses such as process capability and control charts presuppose normally distributed data. Previously, this condition was taken for granted; now the system validates it at every data collection.

Configuration is done per characteristic: you choose the tests and the significance level (default 0.05). Once this is done, they are calculated at every data collection and displayed in analyses and charts, and the view profile defines what appears on each screen.

There are four normality tests, each with specific characteristics for evaluating data distribution:

  • Shapiro-Wilk: high sensitivity, recommended for small samples.
  • Anderson-Darling: robust fit to normality, for intermediate samples.
  • Kolmogorov-Smirnov: compares the data with a theoretical normal distribution, for larger samples.
  • Chi-Square: evaluates observed and expected frequencies, for large volumes.

The result includes the test statistic, the p-value, and a direct interpretation, indicating whether normality was accepted or rejected. 

Thus, SoftExpert SPC strengthens the reliability of analyses, reduces risk in industrial decisions, and prepares your organization for audits. 

 

Advanced capability study from receiving inspection

SoftExpert SPC now offers a much more complete capability analysis for SoftExpert Inspection's receiving inspection data. 

In version 3.2 of SoftExpert Suite, the readings collected during receiving can be taken to the SPC simulation environment, where they gain control charts, configurable view profiles, and normality tests. Previously, without these resources, the calculation of capability indexes (Cp, Cpk, Pp, Ppk) during inspection was more limited. 

With an already established analytical environment, the capability study becomes more robust, visual, and reliable, without recreating data or switching between solutions. See what this new feature delivers:

  • In-depth study, with the analytical resources of SPC applied to receiving data.
  • Consolidated report, bringing together measurements, statistical results, and charts in a single document.
  • Stratification sample export to the analysis environment, expanding data sources.
  • Complete traceability, with a link between the analyzed receivings and the generated analysis.

With this evolution, SoftExpert SPC broadens the scope of capability analyses and connects receiving inspection to its statistical environment, with more depth and support for data-driven decision-making. 

 

CMM file import now also in SoftExpert Inspection

The import of measurements from CMM (Coordinate Measuring Machine) files, already available in SoftExpert SPC data collection, is now shared with SoftExpert Inspection in version 3.2 of SoftExpert Suite. 

With this, during receiving inspection, the component uses the same import configuration that exists in SPC, delivering a consistent experience across components and expanding the use of data generated by measuring machines. 

Discover the new features for version 3.2 of SoftExpert Inspection by clicking here.

 

 

Warning limits for preventive monitoring of control charts

Version 3.2 of SoftExpert Suite expands the monitoring capabilities of SoftExpert SPC with warning limits: positioned before the control limits, they create an intermediate band that anticipates changes in the process. 

The limits are calculated from the chart's own control limits and automatically track the process, adjusting whenever the chart is recalculated or the standard deviation changes, to keep alerts consistent. 

Configuration is flexible and organized in layers. You define general parameters for SPC and, when necessary, customize the behavior on the item characteristic or the data collection characteristic, with consistent inheritance across levels and without rework. 

Tracking becomes more active with the Event log: once warning limits are enabled, the system automatically logs an event whenever a point exceeds the upper or lower limit during data collection, without manual action. 

With warning limits, SoftExpert SPC offers an extra layer of monitoring that helps your team identify deviation trends earlier, supporting faster decisions and more stable, predictable processes. 

 

Sigma multiplier configuration for control limits and capability indexes

In this version, SoftExpert SPC now allows configuring the sigma multiplier of variable charts, previously fixed at 6 sigmas. Now, you adjust this value per process, independently, for control limits and capability indexes. 

Control limit sigma multiplier

In the Data collection (SP001) menu, you enable the sigma multiplier per characteristic and enter a value from 1 to 10 (with two decimal places); the default remains 6. 

The configuration is applied individually per characteristic and, when disabled, the system keeps the default of 6 sigmas, with no impact on existing calculations. 

Capability index sigma multiplier

The capability index multiplier (Cp, Cpk, Pp, Ppk) is located in the General parameters (SP019), independently of the control limits, with three options:

  • Default (6σ): traditional calculation, unchanged.
  • Customized: you specify the multiplier to apply to the indexes.
  • Use the control limit multiplier: the indexes use the same value defined for each data collection.

This configuration applies to new data collections and does not change the results of existing ones. 

In both cases, the system keeps the operation transparent: it indicates the impact of each multiplier, asks for confirmation when the value is changed, and displays the applied multipliers only when they differ from the default. 

With this new feature, SoftExpert SPC broadens its statistical capabilities and aligns with market practices, which results in more control and adherence to each process, without compromising the consistency of already consolidated results. 

 

Result summary directly on charts

Version 3.2 of SoftExpert Suite enhances graph analysis in SoftExpert SPC with an expandable panel that brings together the main statistical results, including dispersion data and histogram indicators. 

This is controlled through the View profile, which gains the new Result summary section. In it, you choose which indicators appear on the charts, across two areas:

  • Variables: capability indicators (Cp, Cpk, Pp, Ppk), statistical results (mean, range, standard deviation, among others), adherence to specification limits, and normality tests.
  • Attributes: occurrences and quality (samples, defective items, rejected items, defects) and specific indicators (average p, np, c, and u).

Simply associate the profile with the data collections so that each chart displays only the enabled results, according to the view type and data type. Data collections without an associated profile continue to present the results in the default format.

By bringing the numbers closer to the visual representation, this new feature makes reading the charts faster, gives the user control over what to track, and delivers more fluidity to analyses in the SPC routine.

 

New analysis tool layout

The Cause analysis tool in SPC received a completely renewed look. 

The update delivers an entirely redesigned interface, with improvements in performance and navigation fluidity, without changing the already familiar features. 

Check out the main improvements:

  • Modern and intuitive interface: renewed, clearer, and more organized look.
  • Built-in autosave: all information is saved automatically, preventing data loss.
  • Faster creation: the new design makes it easier to build and edit analyses.
  • Structured connections: causes and categories are now connected in a clearer, more logical way.

This update aims to improve the usability and efficiency of cause analyses, making the investigation process simpler, more visual, and more collaborative. 

 

Former menu versions discontinued 

In recent versions, the Collection planning (SP003), Collection tracking (SP004), and Collection deletion (SP023) management menus, the Data collection (SP006) execution menu, and the Data collection (SP007) view menu were migrated to a new model with a more modern, faster, and unified interface, centralizing operations that were previously spread across separate menus. 

Up to version 3.1, using the new menu version was optional, and users could return to the former versions at any time. 

From version 3.2 onwards, the former versions of these menus are no longer available, and the Data collection (SP001) menu becomes the component's standard. The change does not alter features, and all operations remain accessible in the updated menu.

 

See the latest improvements made to this component:


Was this article helpful?